This step applies, for example, when you're running a Wi-Fi network with computers that include built-in Ethernet adapters. To turn off the adapter, double-click the small A network cable is unplugged error window and choose the Disable option. Check both ends of the Ethernet cable to ensure that they are not loose. One end is connected to your computer, and the other is connected to the main network device, probably a router.
If this procedure doesn't help, try testing for a faulty cable. Instead of buying a new one outright, plug the same cable into a different computer or temporarily swap out the Ethernet cable for a known good one. Update the network adapter driver software to a newer version if one is available. If it's already running the latest version, consider uninstalling and reinstalling the driver or rolling the driver back to a previous version.
It might seem impossible to check the internet for outdated network drivers when the network can't reach the internet. This change works around the technical limitations of the adapter by changing the speed and timing at which it operates. Some people report more success with the Half Duplex option, but this setting lowers the maximum total data rate that the device supports.
Remove and reinsert the adapter hardware to verify that it's connected properly. If that doesn't help, try replacing the adapter, if possible. If none of the above procedures fix the "A network cable is unplugged " error, it's possible that the device on the other end of the Ethernet connection, such as a broadband router, is the one malfunctioning.
This should open a new window for that device. The Device Status Screen may give some insight as to what the problem is. If the message here sounds similar to the following "Windows cannot find Drivers for this device, or they are installed improperly," then it is likely that updating the driver will fix this situation.
Make sure that in the "device usage box" that the selection is "Use this device enable ". Click on the Driver tab button at the top of this screen to continue. The drivers tab will give information on what driver windows is currently using for this device. Usually there are newer drivers available for any given card then those that are shipped with it.
Download either the driver or the Auto-installation program from that page in a. I have had that happen before, and after slapping a tester on the jack and the cord to make sure they weren't bad, I have had winsockfix solve this problem a few times.
We had this issue arise today. It ended up being the jack insert in the wall. We have no idea how that happened. There are many free bootable CD's like Trinity Rescue that provide a Linux command line from which ping testing could be used from a different OS and drivers. Cable test from the patch cord to the patch panel as some NIC's tolerate a loose wire better tha others.
To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks. I have tested the cable on multiple jacks I have plugged in another computer and all works except when I plug into one computer. I have diabled it, but cant find where to diagnose issues like I can in Windows 7. Best Answer. Ghost Chili. Updating the network driver would be the first thing I would try.
View this "Best Answer" in the replies below ». Popular Topics in General Windows. Which of the following retains the information it's storing when the system power is turned off? Submit ».
Thai Pepper. Search instead for. Did you mean:. InsideLine 2 Bronze. Network Cable Unplugged XP. Any suggestions??? All forum topics Previous Topic Next Topic. Replies 7. Jerry Park 4 Tellurium. Is your ethernet port connected? If not, you can disable the connection and the notice will go away. Jerry Park wrote: Is your ethernet port connected? The message "Network Cable Unplugged" means exactly what is suggests.
No online enternet connection. Although, interestingly, it does connect every couple seconds and then disconnects. This is somehow connected to the installation of a Linksys Wireless-G card. Showing results for. Search instead for. Did you mean:. Cannot Connect to Internet. A network cable is unplugged - Windows XP Programs. All forum topics Previous Topic Next Topic. Reply 1. Hi, You may follow the options below to determine the cause of this issue: 1.
Ensure that the network cable is connected to the correct port on the network device. You may change the value for the Media Type property on the network adapter: a Click Start, click Run, type ncpa. Refer to the picture below I would also recommend you to check the status of Ethernet Adapter in Device Manager for the other 2 systems.
0コメント